Best Fishing Reels for Fluke
To save you the stress of search for the best reels for fluke, listed below are five reels that are just perfect for the job.
Ideal for fluke, the 2500 model of the Daiwa BG reel has 6+1 bearings, a gear ratio of 5.6:1, and a maximum drag of 13.2 lbs. (6 kg). The body and side cover are made from black anodized machined aluminum housing, and the line-ready spool is made from specially cut aluminum ABS. The reel also features an air rotor, an over-sized Digigear system, and a handle that can be screwed in and out.
- Infinite Anti-Reverse System.
- Waterproof drag system
- The reel weighs 9.3 ounces (0.26 kg).
This reel sports a great carbon fiber HT 100 drag system that is strong enough to reel in fluke with a maximum drag of 15lbs. (6.8kg). The reel’s body, rotor, and side plate are all fully made from metal, and the bail wire is made from aluminum, all ensuring durability. The spool is line-ready and for smooth operation, there are 5 sealed ball bearings made from stainless steel.
- Instant Anti-Reverse System.
- Drag ratio of 6.2:1.
- The durable reel has a high range.
Shimano’s Cold Forged Hagane gearing and a CoreProtect coating are some of the features that make this one of the best reels for fluke. The reel features a gear ratio of 6.2:1 and a maximum drag of 20 lbs. (9.1 kg). Its 3+1 bearings ensure that the reel functions smoothly and it can be used perfectly in both saltwater and freshwater.
- The weight is 9 ounces (0.26 kg).
- Propulsion Line Management System.
- Waterproof and durable.
A Power Stack Carbon Matrix Drag System for high drag strength and a DuraClutch design for durability make this one of the most perfect reels for fluke. The bearing system contains 5 stainless steel HPCR bearings and 1 roller bearing, all combined to provide corrosion resistance and smooth operation. There are right- and left-hand options, and the 60 and 60 HS variations have gear ratios of 4.9:1 and 6.2:1 respectively.Check Price on Amazon
This powerful reel has the Rover Carbon Fiber drag system for great strength and thick anodized side plates for durability. The gear ratio stands at 3.6:1 and there is an oversized T-shaped handle that provides a perfect non-slip grip. For a totally smooth operation, the reel is equipped with 6+1 ball bearings made from stainless steel.
- It is corrosion-resistant.
- There is a centrifugal braking system.
- It is lightweight.
Reels for Fluke Buying Guide
Fluke thrive in deep saltwater and fishing for them comes with its challenges, but with the right reel for fluke, you can handle them as they come. As they also put up decent fighting power, getting the right reel is important to ensure you not only hook your target but also reel in it without your rod failing.
Our buying guide reviews the best reels for fluke on the market based on their specified features and tested performance to give you the best options to choose from. We then take it a step further to outline the particular factors you should consider and qualities you should look out for in a reel for fluke before you make a purchase.
The material from which your reel for fluke is made will determine how easy it will be to handle and how long it will serve. The ideal reel for fluke should combine low weight with high strength and should be very corrosion-resistant. Graphite is a great material, but aircraft-grade alloys and carbon fiber offer the best performance and overall durability.
The line capacity or how much the reel can hold is very important. Specified as a two-figure value, it represents the length of a particular load-tested line the reel can accommodate.
As fluke are bottom-dwellers, your reel should come with large line capacities, the larger the better, to reach the depths. A large line capacity will give you the variety of either making very long-range casts with the smaller line or closer casts with very heavy tension rated lines.
Fishing reels for fluke should have mid-level gear ratios to generate decent reeling speed and decent reeling torque and power.
Higher drag ratings are great for fluke and will allow you to step up to the pulling force at great depths. The drag setting, however, should never be set above the load capacity of the line as the latter will snap before the reel is forced to turn.