Were you looking for an excellent remedy to clean your aluminium boat? Do soap and water fail to remove the dark stain of water? Finding it challenging to afford so-called boat cleaning products available in the market? Never mind, there is a simple DIY hack that can do the magic. And, for this also you don’t need to go far away. Your kitchen is enough to solve your purpose. All you need to have is a bottle of vinegar and a good quality boat brush. Even you don’t need to be fascinated with flavor. A bottle of plain white vinegar is more than enough to do the wonder.
Aluminium boats might not give you trouble when it comes to cleaning them. But it often appears costly and hard to bear. There are a lot of products marketed as boat cleaners. But in practice, either most of them fail to do the job, or it turns out too costly to afford for the beholder. In that case, vinegar comes to work and can do wonders. Being metal, aluminium can’t react with any basic powder. But vinegar is an acid that neutralizes aluminium into salt and water. It will soak the dirt and impurities into it throughout the reaction, which we will wipe out later.
What are the things required for cleaning with vinegar?
Vinegar is a strong acidic compound. That’s why we can’t use it directly on the aluminium layer. So, the first thing we require for the cleaning is definitely vinegar, and the second is water. Distilled water will serve the purpose best. And for best results, warm water is also preferred. Next, what we need is a spray container. And the last thing is a clean cloth for wiping out the residue once the cleaning process is over.
What are the steps of the cleaning procedure?
The first step is to wash all the dirt off from our targeted area. And we can also take the help of soap and a scrubber.
The second step is to make the solution with water and vinegar. And both of them should be added in the same proportion for a perfect mixture.
In the third step, we have to pour the mixture into a spray container and spray it over.
We have to leave the solution over the aluminium surface for a minute maximum. Then we will remove the solution from our metal with the supply of some jet water. Wash off the entire residue and clean it with a wet cloth later.
What are the things we have to keep in mind while cleaning with vinegar?
- We should not directly apply vinegar.
- We should not add water to vinegar. You always need to mix vinegar into the water.
- While making the solution, the quantity of vinegar and water will always remain the same; we should maintain the ratio of 1:1. More is not always better.
- We will prefer distilled water over normal water and a big no for the lake, rain, and saltwater.
- We should not leave the mixture on our boat for more than a minute; otherwise, it may end up damaging the outer layer.
Vinegar is a good cleaner, no doubt, but it might not work when the stain is darker. In that case, we can increase the concentration of vinegar or switch to some other process if it is required.